- shadow 2648
- |
- Noble Heroic Member
Ah, someone leaked. Now to find the leak and.... plug it.
With justice.
I use coup 5
Never Played halo 1 = Invalid opinion
Bloom isn't whats broken, its your idea of what good is and your opinion
Thats like saying uber nerf armor lock because like 20 percent of the community hates it. Oh wait..................
Posted by: Ziex
Posted by: shadow 2648
Posted by: Ziex
Hi all!
So, i got all the parts and assembled them, installed windows and all the updates etc.
But, when i start the computer, first the asus screen comes up, and says "no device found"(along with an error beep!). Then It goes black. Then the asus screen comes back, saying nothing, and then windows starts normally. I plugged my SSD into he SATA6GB_1, and my dvd-reader into the SATA3GB_1. I also have an HDD that I have yet to plug in, but its also SATA6GB.
Did it plug something wrong? If it wasnt clear, its an Asus motherboard.
Ok first of what asus board
second does the board have on board error reporting.
third, if so during the beep which error number is reported.
Asus P8H67-M PRO
No error message. First it says; "scan device."
Then, after a short time, "No device found!".
I plugged in my HDD, no change.
Sounds like you might have a boot device setup error,
Enter your boards bios settings and cheack to make sure it isn't looking for your main hard drive in the wrong place first. See if the board is looking for sata6_2 or even in a sata 3_* location then make sure its not cheacking for a raid setup. Some boards do this by default.
Try swapping the boot device over to the HDD and then back to the ssd in the same bios sesion... aka just cycle the boot device options and save.
[Edited on 08.03.2012 7:43 AM PDT]